Environmentally Friendly Bathroom Design
Environmentally Friendly Bathroom Design
View more bathroom designs
Bathroom Design: an Environmental View
Save money (and water) in your bathroom
By: Sarah Petersen
Bathroom showers, toilets, and sinks account for approximately 75% of the
water used in each American home. It is important for all of us to do more
to save water, both to protect our world’s natural resources and to lower
the economic impact of wasteful water usage. Custom bathroom design with a
few simple and inexpensive concepts in mind can save so much water that if
every person in the United States made these modifications, our country
would save 10 trillion gallons of water per year. At an estimated cost of
$.002 per gallon (the average cost in the United States, although prices
differ from city to city), that would save our economy 20 billion dollars a
year! You don't need to forgo environmental concerns to design a luxury
bathroom.
Everyone can do a little more to protect our natural resources, and reading
this article will give you a good idea why and how.
Master Bathroom Design:
Designing an environmentally friendly bathroom is surprisingly easy and
affordable. If you are remodeling a bathroom, the most important purchases
are dual-flush toilets, faucet aerator , and adjustable or low flow
showerheads. If you have an existing bathroom, updating your toilet will be
slightly expensive, but replacing your showerhead and adding a faucet
aerator will be cheap. Even the expense of replacing a toilet should pay for
itself over time because it could lower your water bill by as much as $75
per year. You can reduce the amount of water an older toilet uses by placing
a half gallon plastic jug in the tank. Once you have the adjustable flow
showerhead, you should set it to use the lowest amount of water pressure
that still allows you to have a relaxing and enjoyable shower.
Older bathroom toilets generally use about 5 gallons of water per flush. If
you have an older bathroom, please reconsider a modern bathroom remodeling
project. Most modern toilets use about 1.6 gallons per flush. On the other
hand, a dual-flush, ultra low flow toilet can use as little as .5 gallons
per flush. The average person flushes a toilet 8 times per day, so a family
of four can save 13,000 gallons of potable water per year by using a
dual-flush toilet instead of a standard modern toilet, and 52,000 gallons of
water compared to the older toilets that still exist in many homes. If
everyone in the United States used a toilet like this, we would save 3.9
trillion gallons of potable (drinkable) water per year. What an amazing
saving this would be for our countries natural resources. And of course, by
bathroom remodeling with a toilet like this, you will save money on your
monthly water bill.
In Denver, Colorado and Phoenix, AZ, tap water costs about $.001 per gallon.
In Tucson, AZ, tap water costs about $0.0025 per gallon. It Pittsburgh, PA,
Washington, DC, Boston, MA, and other east coast cities, water costs around
$.001. The average cost of water in Los Angeles, California is about $0.004
per gallon. The difference in the cost of water is primarily because of the
lack of a major river flowing into Tucson. Phoenix has 3 rivers to draw
water from the Salt River, Colorado River, and the Gila River. On the other
hand, Tucson and other cities in Arizona have to draw their water out of the
ground. Not only does this mean that the water is expensive, but it also
means that the natural resource is bound to run out. So clearly, for
economic reasons and environmental purposes, it is important for our country
to be conscious of saving water.
Lets take a look at some other ways that we can save water in the bathroom:
If your bathroom was designed before 1992, your showerheads probably put out
5 gallons of water a minute (GPM). Multiply this by the number of minutes
you're in the shower, and the water usage adds up rapidly. After 1992,
showerheads became legally required to put out no more than 2.5 gallons of
water (you can find an adjustable showerhead that puts out as little as 1.0
gallons of water per minute and still offers an enjoyable shower). The
average person uses a shower for 10 minutes per day, so switching to a low
flow showerhead can save a family of four about 58,000 gallons of water per
year, and our country as a whole would save 4.3 trillion gallons of water
per year. If you reduced the length of your shower from 10 minutes to 8
minutes, you could save even more water!
Other tips for saving water in the bathroom:
Bathroom sinks:
Standard bathroom faucets use 2.5 gallons of water per minute. Turning off
the water while you brush your teeth (2 minutes) should save you
approximately 5 gallons of water per day, or 1825 gallons of water per year.
Installing a faucet aerator is the easiest way to reduce bathroom faucet
water use; they usually reduce the flow of a bathroom sink from 2.5 GPM to
1.5 GPM. Other ways to save water include making sure that you do not have a
leaky toilet, turning off the faucet while you wash your hands, filling up
the wash basin to rinse your razor before you shave instead of running the
water, and being generally conscious to keep the water off unless it is
absolutely necessary to have it running.
Water heater location and pip insulation:
Placing your water heater as close as possible to your kitchen and master
bathroom will lower the amount of time you must run a faucet before the
water gets hot.
Steam Showers, Steam Rooms, and Steam Baths:
The amount of water used in the steam portion of a steam bath or steam
shower is relatively low compared to the amount that runs down the drain
while a shower is being used. Most steam showers only generate steam for a
few seconds at a time. However, the smaller the enclosure that the steam
room is in, the less water will disappear into the air.
Bathtubs with Inline Heaters:
A whirlpool bathtub with an in-line heater allows you to heat the water
rather than refilling the tub with warmer water as the tub cools down. This
can be a significant water saving.
Infrared Saunas:
One bathroom idea that will avoid the usage of steam is an infrared sauna.
Unlike a stove or steam sauna, infrared saunas do not require any water to
generate heat.
Modern Bathroom Toilets:
You can test your toilet for a leak by adding food coloring to the tank. If
the toilet leaks, color will appear in the toilet bowl within 15 minutes.
Other ideas for saving water in your bath:
1) Keep your eye out for dripping faucets. You can fix a dripping faucet by
replacing washers. If your faucet drips at a rate of 1 drop per second,
expect to waste 2500 gallons per year.
2) Check for leaky toilets
3) Take a look at your water meter while no water is being used in your
house. If it goes up, you obviously have a problem! This can also help you
locate underground service leaks.
4) Do not use your toilet as a trash can. Throw trash in the trash! Extra
flushes waste water
5) Keep water pitchers around to collect water that runs while you wait for
the water to heat up. You can use this as drinking water or to water your
plants!
6) Keep drinking water in the refrigerator instead of letting the tap run
while you wait for cool water.
7) Consider installing an instant water heater on your kitchen sink so you
don’t have to let the water run while it heats up. This will reduce water
heating costs for your household.
8) If taking a bath, begin filling the tub with the drain already plugged,
don't wait for the water to warm up before plugging the drain. Instead,
adjust the water temp while the tub fills. Take a short shower instead of a
bath. While a five minute shower uses a 12 to 25 gallons, a full tub
requires about 70 gallons.
9) The average person uses 100 gallons of water per day for everything from
drinking to bathing to garden maintenance. The average household water bill
is $300 per year. So lets save some money and protect our environment!
Ultimately, even a luxury bathroom can be designed or remodeled to save
water.
